Sony SIR4260V Benutzerhandbuch

COLOR DOME CAMERA

User Guide

COLOR DOME CAMERA

User Guide

Select a desired EXIT mode using the Function Setup switch.
- SAVE : Save the current settings and exit the MAIN SETUP menu.
- NOT SAVE : Do not save the current settings and exit the MAIN SETUP menu.
- RESET :  Resets the camera settings to the factory defaults. Language, Communication and Monitor 

settings are not initialized.

COMM ADJ (Communication Adjustment) : 

This function sets up the camera communication status when controlling the camera 
through an external control device.

…   1) … When the SPECIAL menu screen is displayed, press the 

Function Setup switch so that the arrow indicates
‘COMM ADJ’.

… … 2) … Set up the mode using the Function Setup witch.

 

- CAM ID :  Determines the camera's identification 

number (between 0 and 255).

 

- BAUD RATE :  You can select 2400/4800/9600/19200/

38400/57600 bps.

 

- UART MODE :  You can select NONE, EVEN or ODD for 

the parity bits.

 

- RET PKT :   Determines whether to send a command back to the controller device when a 

communication control command is sent to the camera.

 

- DISP CAM ID :  Display camera title on top left corner of the screen.

 

- Protocol :  Select the communication PROTOCOL.  

(STW(SPD)/PELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/SEC/PANASONIC)

 

- RETURN :  Select this to save the PRIVACY menu settings and return to the SPECIAL menu.

* Initial value of communication adjustment 

Camera ID

BAUD RATE UART MODE

PET PKT

1

9600

8-NONE-1

ENABLE

LANGUAGE  : You can select the menu language according to your requirements.

RETURN  : Select this to save the SPECIAL menu settings and return to the MAIN

SETUP menu.

•  As the DIS function uses the digital zoom the camera's resolution will decrease.

•  DIS doesn’t operate when background illumination is too low. 

•  DIS doesn’t operate when object pattern is monotonic as like sky or white wall.

Notes

DIS (Digital Image Stabilizer) :  

This function mitigates any picture movement due to external factors such as wind.

  PRIVACY :  Mask an area you want to hide on the screen.

 

PRIVACY AREA SETUP

  1. AREA 

AREA1

 

2. MODE 

OFF

  3. MASK COLOR 

GREEN

  4. MASK TONE 

1

  5. TOP 

39

  6. BOTTOM 

79

  7. LEFT 

13

  8. RIGHT 

52

  9. RETURN

  1) … When the SPECIAL menu screen is displayed, press the Function Setup switch so that the

arrow indicates ‘PRIVACY’.

… … 2) … Set up the mode using the Function Setup switch.

    - AREA : You can select up to 12 PRIVACY areas.
    - MODE :  Determines whether to use the area selected in the AREA.
    - MASK COLOR :   Determine area color. You can select Green, Red, Blue, Black, White, Gray.
    - MASK TONE :  Adjust the brightness of MASK COLOR.
    - TOP/BOTTOM/LEFT/RIGHT :  Adjust the size and position of the selected area.
    - RETURN :  Select this to save the PRIVACY menu settings and return to the SPECIAL menu.