Sony SIR4260V Benutzerhandbuch

COLOR DOME CAMERA

User Guide

COLOR DOME CAMERA

User Guide

Using RS-485 communication will enable you to control the OSD menu from a SAMSUNG
TECHWIN System Controller or DVR.
(1) Connection to a PC.
 

 Connect the camera to the PC via a RS-485 converter using RS-485 and a serial cable.

  EX)  SERIAL PORT OF THE PC(COM1) → SERIAL CABLE → RS-485 CONVERTER → RS-485 

CONTROL CABLE 

 WHITE (TRX+)

RS-485+

 BLCAK (TRX-)

RS-485-

•  When making a control system to control the camera, please use to the STW(SPD)

PROTOCOL or PELCO-P, PELCO-D, VICON, PANASONIC, BOSCH, HONEYWELL, SEC 
PROTOCOL.

•  When you connecting to RS-485 control cable, please peel off the outer skin inside the 

RS-485 control cable.

•  In  case  of  SCC-101  connection,  change  communication  mode  to『

8-E-1

』at 

『Communication configuration』menu. (For more information, refer to SCC-101 manual.)

Notes

* RS-485 Communication establishment initial value

(+) CONNECTION TERMINAL

WHITE (TRX+)

(-) CONNECTION TERMINAL

BLACK (TRX-)

Camera ID

BAUD RATE

UART MODE

RET PKT

1

9600

8-NONE-1

ENABLE

(2) Connection to a DVR or System Controller.
    Connect the RS-485 cable to the connection ports of the DVR or System Controller.

• Coaxial Communications System
• OSD Control method

DVR

SET

MENU / ENTER

OSD KEY

UP

UP KEY

JOYSTICK UP

DOWN

DOWN KEY

JOYSTICK DOWN

LEFT

LEFT KEY

JOYSTICK LEFT

RIGHT

RIGHT KEY

JOYSTICK RIGHT

300m

3C2V(RG-59/U)

450m

5C2V(RG-6/U)

600m

7C2V(RG-11/U)

– Video Cable

  The camera's video output port is connected to the monitor with a BNC coaxial cable,

shown below : If the distance between the camera and the monitor exceeds the 

recommended maximum, please use an auxiliary video amp.

 •  If the camera is controlled through coaxial communication, please use a video amp intended 

for coaxial communications. Regular video amps do not transfer coaxial signals.

Notes

WHITE (TRX+)

BLACK (TRX

-)

•

: BNC

• ---- : RS-485