Sony SIR-4160 Benutzerhandbuch

COLOR CCD CAMERA

User Guide

COLOR CCD CAMERA

User Guide

 OFF : Not being used

3.  Select a desired mode using the Function Setup switch and press the Function Setup switch. 

   Select ‘BLC’ to adjust the area to be 

 enhanced then adjust the level.

 HLC :  Enable the user to change the level, 

limit, mask color/tone and area.

• Because there can be a difference in the effectiveness of HLC according to the amount of

light area in the screen, optimize the installation angle for the best HLC performance.

• When dark, the HLC is only activated when a bright light exceeding a specific size in

NIGHT ONLY mode.

• The HLC is not activated in day light or when bright light is not present at night in NIGHT

ONLY mode.

• BLC Function doesn't work in the B/W mode of the DAY/NIGHT menu.

Notes

This function reduces the background noise in a low luminance environment.
1.  When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function 

Setup switch so that the arrow indicates ‘SSNR3’.

2. Select a desired mode using the Function Setup switch.

  OFF : Deactivates SSNR3. Noise is not reduced.       

   ON : Activates SSNR3 so that noise is reduced.       

3.  Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can 

adjust the noise reduction level.

MAIN SETUP

 

1.LENS 

DC 

 

2.EXPOSURE  

 

3.WHITE BAL 

ATW 

 

4.SSDR 

OFF 

 

5.BACKLIGHT 

OFF 

 

6.SSNR3 

ON 

 

7.DAY/NIGHT 

AUTO

• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the

EXPOSURE menu is ‘OFF’.

• When adjusting the noise reduction level in the SSNR3 mode, remember that

the higher the level set, the more the noise level will be reduced, as will the
brightness of the image.

Notes

(Black, Red, Blue, Cyan, Magenta)

    - TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced