Sony HSR-1/1P Benutzerhandbuch
10
Detailed Descriptions of Commands
USER DATA PRESET (DAH+9EH)
Sets user data to be added to each picture frame to be
recorded. A maimum of 32 bytes (NTSC model) or 40
bytes (PAL model) can be recorded/reproduced. If
data of less than 32 or 40 bytes are specified, the
remaining bytes are padded with 0s. If data of more
than 32 or 40 bytes are specified, the extra bytes are
ignored. Use the numerical value commands (30H to
3FH) for data.
The user data are valid for pictures to be recorded
(captured) after you set the data.
recorded. A maimum of 32 bytes (NTSC model) or 40
bytes (PAL model) can be recorded/reproduced. If
data of less than 32 or 40 bytes are specified, the
remaining bytes are padded with 0s. If data of more
than 32 or 40 bytes are specified, the extra bytes are
ignored. Use the numerical value commands (30H to
3FH) for data.
The user data are valid for pictures to be recorded
(captured) after you set the data.
Example
:
To set user data 01H and so on for camera
10:
MENU PRESET (DAH+9EH)
Specifies the setup menus.
The operation is determiend by the subcommand (first
byte) value.
The operation is determiend by the subcommand (first
byte) value.
Subcommand (first byte)
00H: Sets data for the specified ITEM number.
10H: Reads the data of all the ITEM numbers from
00H: Sets data for the specified ITEM number.
10H: Reads the data of all the ITEM numbers from
nonvolatile memory
20H: Returns the data of all the ITEM numbers to the
factory default settings.
21H: Returns all the data except those related to the
parallel I/O to the factory default settings.
F0H: Stores the current settings to nonvolatile
memory.
For the ITEM numbers and data values, see “Menu ITEM
Numbers and Set Values” on page 18.
Numbers and Set Values” on page 18.
Example 1
:
To change the ITEM number 23 data
setting to 12:
Example 2
:
To write the data to nonvolatile memory:
Notes
• When the subcommand is 10H, 20H, 21H, or F0H,
COMPLETION (01H) will be returned after the
respective operation is completed. Menu operation is
disabled during this process.
respective operation is completed. Menu operation is
disabled during this process.
• To maintain any change in data, be sure to store the
data in nonvolatile memory (the subcommand F0H).
If the data are not written to nonvolatile memory, the
previous settings will be resumed when you next turn
on the power.
If the data are not written to nonvolatile memory, the
previous settings will be resumed when you next turn
on the power.
• When the menu version changes, some ITEM
numbers may be added or deleted. Similarly, data of
an ITEM number may be added, while the meaning
of data items of the same number does not change.
an ITEM number may be added, while the meaning
of data items of the same number does not change.
• When a menu is being operated on the HSR-1/1P,
menu operation via the RS-232C is disabled.
LOCK ON (D8H+94H)
Disables all function keys of the VTR.
LOCK OFF (D8H+95H)
Enables all function keys of VTR.
RxD
TxD
TxD
DAH
0AH
92H
31H
30H
30H
31H
40H
0AH
0AH
40H
0AH
0AH
0AH
0AH
EXP-3
CMD
1
0
DATA
DATA
ENTER
ACK
ACK
ACK
ENTER
ACK
ACK
ACK
ACK
RxD
TxD
TxD
DAH
0AH
9EH
00H
32H
31H
32H
40H
0AH
0AH
33H
0AH
40H
0AH
0AH
0AH
0AH
0AH
EXP-3
CMD
SUBCMD
2
1
2
ENTER
ACK
ACK
ACK
3
ACK
ENTER
ACK
ACK
ACK
ACK
ACK
RxD
TxD
TxD
DAH
0AH
9EH
F0H
0AH
0AH
01H
EXP-3
CMD
SUBCMD
ACK
ACK
ACK
COMPLETION