Sony MPEG4 LAN Camera Benutzerhandbuch

 

55

5.1.8  PPPoE & DDNS 

1.  Install the XDSL software (obtained from your ISP dealer) in your PC. 

2.  Search your LAN CAMERA's IP address: you can use your Network Viewer's Scan IP 

program, or just connect the LAN CAM and the Video monitor. The monitor screen will show 

the IP address on its right side. 

3.  Change the switch on the LAN CAM's side panel to position # 4. 

4.  Installing an IP address in your PC or notebook. 

Desktop 

→ Move the mouse focus to the Network neighborhood and click the right key of the 

mouse 

→ Choose the properties → Choose your local connection → Choose the properties 

and select the configuration 

→ Select the TCP / IP → Choose the properties → Type in the 

IP address in a four-part formula, for example “192. 168. 1.101” (the first three parts must be 

identical to the above numbers, only the last part can be changed to your own number, which 

must never exceed 255) 

→ Click the mask and the mask input, namely “255. 255. 255. 0” (a 

fixed formula) 

→ Click “OK” → Click “OK”. 

5. Desktop 

→ Choose IE browser → Type in the LAN CAMERA IP address in the URL (check 

step # 2 above) 

→ Enter → LAN CAM images will appear. 

 

 

1. 

Enter the LAN CAMERA home page 

→ Choose the network → Type in “User Name: admin” 

and “Password: 9999” 

→ Click “OK’. 

2. Choose 

PPPoE 

→ PPPoE mode: Select “ON” → Type in “Account” → Type in “Password” 

→ Submit → Unplug the power connection. 

3. 

Plug in the LAN CAMERA and it will receive an IP address from the ISP dealer (this IP 

address is dynamic --- every time you unplug and plug in again you’ll get a new IP address).