VIVOTEK IP7135 Benutzerhandbuch

  Restoring the factory defaults 

will erase any previous settings. 

Reset or restore the system after 

power on. 

The following table lists the LED patterns in general. 

Condition LED 

color 

Loading system after power on 

Steady blue 

During booting procedure 

Steady blue and red 

Detecting and setting network 

Steady blue and blink red till IP address is

confirmed 

After network is setup (system up) 

Blink blue every second and steady red 

During the upgrade firmware process 

Blink blue every second and fast blink red 

There is a button in the back of the Network Camera. It is 

used to reset the system or restore the factory default 

settings. Sometimes resetting the system sets the system 

back to normal state. If the system problems remain after 

reset, restore the factory settings and install again. 

RESET:    

Click on the button. 

RESTORE:    1. Press on the button continuously. 

2. Wait for self-diagnostic to run twice. 

3. Free the button as soon as the second 

self-diagnostic starts. 

For some customers who already have their own web site or web control application, 

the Network Camera can be easily integrated through convenient URLs. This section