Sony 26-473-01 Datenbogen

5. Connect the Comm Adapter to the “RS-232C/422A” port on the projector.

6. Connect the CC-50’ or (CC-100’) cable from the 9-pin male connector of the

Comm Adapter to the 15-pin HD “PJ COMM” port on the rear panel of the
System 4

.

______ Secure all of the connector screws.

7. Ensure the projector’s RS-232C/RS-422A switch is in the RS-232C position.

8. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV

cable into the System 4

 output   Connect the other end of the cable into the

“INPUT A”  BNC connectors of the projector.

Use the illustration below as a guide when connecting the System 4

 to a Sony

RS-232 projector. Refer to Sony documentation to continue the installation.

CC 50'

9-pin

9-pin

9-pin

Comm Adapter

26-473-01

Female

Male

Male

15-pin

15-pin

0

1

E

____________ In a rack mount, do NOT allow the weight of the cables to be supported by the

System 4xi. See page 2-5 for cabling guidelines.

____________ Ensure the projector’s INDEX and PERIPHERAL dials are set to 01.