Husqvarna T536 Benutzerhandbuch

English

 –

 11

Make sure the machine is switched on or off when the 
activate/deactivate button (1) is pressed and held (>1 
sec.). The green LED (2) is lit or turned off.

The warning indicator (3) flashes if the chain brake is 
activated or if there is a risk of overload. The overload 
protection temporarily deactivates the machine. When the 
machine is restored to normal temperature it is again 
ready for use. Solid light indicates need for service. 

The machine is equipped with an automatic shutdown 
feature that deactivates the machine if not used. The 
machine will deactivate after 2 minutes.

Your chain saw is equipped with a chain brake that is 
designed to stop the chain if you get a kickback. The chain 
brake reduces the risk of accidents, but only you can 
prevent them.

Take care when using your saw and make sure the 
kickback zone of the bar never touches any object.

•

The chain brake (A) can either be activated manually 
(by your left hand) or automatically by the inertia 
release mechanism.

•

The brake is applied when the front hand guard (B) is 
pushed forwards.

•

This movement activates a spring-loaded mechanism 
that stops the drive sprocket.

•

The front hand guard is not designed solely to activate 
the chain brake. Another important feature is that it 
reduces the risk of your left hand hitting the chain if 
you lose grip of the front handle.

•

Use the chain brake as a ”parking brake” when 
starting and when moving over short distances, to 
reduce the risk of moving chain accidentally hitting 
your leg or anyone or anything close by.

•

To release the chain brake pull the front hand guard 
backwards, towards the front handle.

•

Kickback can be very sudden and violent. Most 
kickbacks are minor and do not always activate the 
chain brake. If this happens you should hold the chain 
saw firmly and not let go.

(1)

(2)

(3)