Sony WRT-807B Benutzerhandbuch

12

(GB)

If you have any problem using this unit, use the following checklist. Should any problem persist, consult your Sony dealer.

• The + and – poles of the battery do not match those of the battery compartment. 

b

 Insert the

battery with the poles correctly matched.

• The battery is exhausted. 

b

 Replace the battery with new one.

• The battery terminals in the microphone are dirty. 

b

 Clean the + and – terminals with a cotton

swab.

• The battery is exhausted. 

b

 Replace the battery with new one.

• A manganese battery is being used. 

b

 Use an alkaline battery. The battery life of a manganese

battery is less than half that of an alkaline battery.

• The microphone is being used under cold conditions. 

b

 The battery runs down quickly under cold

conditions.

The HOLD switch is in locked position. 

b

 Change the HOLD switch to the unlocked position.

An attempt was made to change the channel by pressing the SET button only. 

b

 Turn the

microphone off, then turn the microphone on again while holding down the SET button. Then
change the channel with the + and – buttons.

• The indication on the LCD is flashing. 

b

 The microphone is in channel setting mode. Turn the

power off, then on again.

• The channel setting on the microphone is different from that on the tuner. 

b

 Use the same channel

setting for both the microphone and tuner.

• The AF or RF indicator does not turn on. 

b

 Confirm that the microphone and tuner are both turned

on.