Kawai CN22 Benutzerhandbuch

Page

27

FUNCTION MODE

4) TUNING

The TUNING function allows the piano’s pitch to be fi nely adjusted, and may prove useful when playing with other 

instruments.

The factory default value is set to the modern standard A = 440.0 Hz and can be adjusted in 0.5 Hz increments.

… Step 1

Press and hold the METRONOME and SOUND SELECT buttons simultaneously then press the key 
assigned to the TUNING function.

A tuning tone will be played.

… Step 2

While still holding down the METRONOME and SOUND SELECT buttons, press the ‘- (off)’ or ‘+ (on)’ keys 
to lower or raise the tuning pitch by 0.5 Hz, or enter the desired tuning pitch as a three digit number using 
the number keys.

„ For example, to set the tuning pitch to A = 441.5 Hz, fi rst press the keys ‘4’, ‘4’, and ‘1’, then press the ‘+ (on)’ key.
  Alternatively, fi rst press the keys ‘4’, ‘4’, and ‘2’, then press the ‘- (off)’ key.

5) REVERB

The REVERB function adds reverberation to the sound, simulating the acoustic environment of a recital room, 

stage, or concert hall. There are three types of reverb available: Room, Stage and Hall.

The most suitable reverb setting is applied to each sound type automatically.

… Step 1

Press and hold the METRONOME and SOUND SELECT buttons simultaneously then press the key 
assigned to the REVERB function.

… Step 2

While still holding down the METRONOME and SOUND SELECT 
buttons, press one of the following keys to select the Reverb 
type:

Key 1: ROOM

Key 2: STAGE

Key 3: HALL

„ The REVERB function is automatically activated when the CN22 

digital piano is turned on.

… Step 3

To turn on/off the REVERB function, press and hold the METRONOME and SOUND SELECT buttons 
simultaneously, press the key assigned to the REVERB function, and then press the ‘+ (on)’ or ‘- (off)’ 
key.

number keys

Reverb Off
Reverb On

Key 1: ROOM

Key 2: STAGE

Key 3: HALL

 

1 2  3 4  5 6  7 8  9 0

 -  +
 off  on

CN22_EN.indd   27

2008/10/01   9:25:27