Hunter Fan 30832 Benutzerhandbuch

3

©2010 Hunter Fan Co. 

43095-01   20100615

1. Take the Auto Duster out of the box and 

remove the clear plastic protective bag and 

place the unit on a firm level surface.

2. Before turning on the Auto Duster, you 

need to confirm that the filters are firmly in 

place and have not become loose during 

shipping. To check the filters, open the front 

grill by grabbing the tabs on each side of 

the unit and unlatch them.

3. The Auto Duster

®

 filter will be resting inside 

the unit. If present, remove the plastic bag 

surrounding the filter and place the filter 

back into the Auto Duster. The  filter should 

be placed in the unit with the white side out 

as shown in Figure 1.

4. Place the bottom of the grill back into the 

indention in the base and push the door 

back until the tabs on each side snap into 

place.

6. Plug the unit into a 120V electrical outlet.

To turn the unit on and choose the appropriate 

speed use the rotary switch on the top of the 

unit. 

Dust and other large particles are pulled into 

the Auto Duster Grill by the fan. The plastic 

screen on the filter attracts larger particles 

like, pet dander and hair, and traps them. 

Smaller particles such as dust are trapped 

within the filter. Dust-free air is then released 

into the room through the top grill. 

To replace the Auto Duster filter:

1. turn the unit off and unplug from the wall.

2. Snap the front grill off by putting your 

fingers behind the tabs located on either 

side of the unit and pull forward. 

3. Remove the filter from the unit and discard.

4. Seat the new filter into the unit ensure the 

white side is facing towards you.

5. Place the bottom of the grill into the 

indention in the bottom of the unit and 

press the grill back into place. The tabs on 

either side of the unit will snap into place.

6. Plug the unit back into your wall outlet.