Samsung SCC-B5344 Benutzerhandbuch

❚

Connecting cables and changing the settings

Before installing your camera, you have to adjust the lens focus, zoom, and switch settings.

To connect cables

1. Connect the BNC cable

to the Video connector

attached on your camera.

. Connect the BNC cable

to the Video Input on a

monitor.

. Connect the power adapter

to the Power connector

attached on your camera.

When the monitor is turned

on, the camera image

appears.

To adjust the lens focus, zoom, and function settings

1. Remove the Cover dome and Inner cover. For more details about the removing procedures,

see “Installation procedure,” in the Installing camera section on the next page.

. Adjust the focus, zoom, and function settings of your camera using the Focus lever, Zoom

lever, and Switch board while you are viewing the image on the screen.

. If you want to fix the adjusted focus and zoom, screw up the levers.

BNC Cable

Monitor

B5344_B5345-00687D(00).indb 10

2008-09-05 오전 10:40:25