Samsung 933HD Plus Benutzerhandbuch

¦

If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300 Ω 

Flat Twin Leads’ below.

If your antenna has one lead that looks like the diagram to the 

right, see ‘Antennas with 75 Ω Round Leads’.

If you have two antennas, see ‘Separate VHF and UHF 

Antennas’.

If you are using an off-air antenna (such as a roof antenna or 

‘rabbit ears’) that has 300Ω twin flat leads, follow the directions 

below.

1.  Place the wires from the twin leads under the screws on a 300-

75 Ω adapter (not supplied). Use a screwdriver to tighten the 

screws.

2.  Plug the adaptor into the ANT IN terminal on the back of the TV. 

Plug the antenna lead into the 

ANT IN terminal on the back of 

the TV.

If you have two separate antennas for your TV (one VHF and 

one UHF), you must combine the two antenna signals before 

connecting the antennas to the TV. This procedure requires 

an optional combiner-adaptor (available at most electronics 

shops).

1.  Connect both antenna leads to the combiner.

2.  Plug the combiner into the ANT IN terminal on the bottom of 

the rear panel.

BN59-00905F_eng.indd   5

2009-11-10   9:30:38