Samsung BN59-00905F Benutzerhandbuch

1.  Press the mENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the E button.
2.  Press the E button again to select “Plug & Play”. For further details on setting up options.

The “

 

N

Plug & Play” feature is only available in the TV mode.

¦

❑

Before your television can begin memorizing the available 

channels, you must specify the type of signal source that is 

connected to the TV (i.e. an Air or a Cable system).

Press the 

 

T

TOOLS button to display “Tools” menu. You can 

also set the Antenna by selecting “

Tools → Switch to Cable 

(or Switch to Air)”.

❑

„

When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC identify 

 

N

various types of cable TV systems. Contact your local cable company to identify the type of cable 

system that exists in your particular area. At this point the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels (Clearing 

 

N

Scrambled Channels). The Auto program menu then reappears.

If you want to stop Auto Programming, press the 

 

N

E button. The “Stop Auto Program?” 

message will be displayed. Select “

Yes” by pressing the ◄ or ► button, then press the E 

button.

❑

This function is used to filter out scrambled channels after “

Auto Program” is completed. This 

process may take up to 20~30 minutes.

To stop searching scrambled channels: Press the 

 

N

E button to select “Stop”. Press the ◄ button 

to select “

Yes”, then press the  button.

This function is only available in “

 

N

Cable” mode.

❑

For the detailed procedures on using the “

Channel List”, refer to the ‘managing Channels’ 

instructions.

You can select these options by simply pressing the 

 

N

CH LIST button on the remote control.

❑

Use fine tuning to manually adjust a particular channel for optimal reception.

If you do not store the fine-tuned channel in memory, adjustments are not saved.

 

N

“*” will appear next to the name of fine-tuned channels.

 

N

To reset the fine tuning setting, press the ▼ button to select “

 

N

Reset”, then press the E button.

Auto Program

Clear Scrambled Channel

Channel List
Fine Tune

Channel

BN59-00905F_eng.indd   12

2009-11-10   9:30:41