Samsung 970P Benutzerhandbuch
Connecting the Monitor
1.
Connect the DC 14V adapter for the monitor to the power port on the Signal Box .
Plug the power cord for the monitor into a nearby outlet.
Plug the power cord for the monitor into a nearby outlet.
2-1.
Using the D-Sub (analog) connector on the video card.
Connect the 'DVI-A to D-SUB' cable to the DVI-I port on the Signal Box .
2-2.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the 'DVI-A to D-SUB' connection cable.
Connect the monitor to the Macintosh computer using the 'DVI-A to D-SUB' connection cable.
2-3.
In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adapter.
adapter.
3.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
complete.
If you properly connect your monitor using the DVI-I connector but get a blank screen, check
to see if the monitor status is set to analog. Press power button to have the monitor double-
check the input signal source.
to see if the monitor status is set to analog. Press power button to have the monitor double-
check the input signal source.