Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. R505
  5. Handbuch

Sony R505 Handbuch

Download
Seite von 222
VAIO® Computer User Guide
196
Troubleshooting the Docking Station
I cannot operate the optical drive in the docking station, when 
the docking station is connected to the computer.
Follow these steps to set the i.LINK®
*
 network switch.
1
Disconnect your computer from the docking station.
2
Disconnect the AC adapter and all cables from your docking station.
3
Set the i.LINK® network switch on the bottom of the docking station to the 
unmarked side with a thin pen tip.
4
Connect the docking station to the computer.
5
Turn on your computer.
I cannot operate the optical drive in the docking station, when 
the docking station is connected to the computer and the 
computer is connected to another computer via an i.LINK 
connection.
Set the i.LINK® network switch at the bottom of the docking station to the 
marked 
more information.
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 
connection. The i.LINK connection may vary, depending on the software applications, oper-
ating system and compatible i.LINK devices. All products with an i.LINK connection may 
not communicate with each other. Refer to the documentation that came with your compati-
ble i.LINK device for information on operating conditions and proper connection. Before 
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk 
drive, confirm their operating system compatibility and required operating conditions.
✍
Do not set the i.LINK network switch when the computer is on. This causes the 
computer to malfunction.
Set the i.LINK network switch after removing all cables connected to the docking 
station.