Sony SAC7000 Benutzerhandbuch
Editing a track's input device
1.
Press Track
or Track
to select the track you want to adjust.
2.
Press Shift+Loop until the TranzPort displays the track's input device.
3.
Hold Shift while rotating the jog wheel to scroll through the available inputs. When you change the input device, an asterisk is
displayed before the device name on the TranzPort.
4.
Press Shift+Punch to set the input device.
Editing a track or mixer control’s output device
1.
Press Track
or Track
to select the track or mixer control you want to adjust.
2.
Press Shift+Loop until the TranzPort displays the track’s output device.
3.
Hold Shift while rotating the jog wheel to scroll through the available output devices. When you change the output device, an
asterisk is displayed before the device name on the TranzPort.
4.
Press Shift+Punch to set the output device.
Configuring a generic MIDI controller
You can configure up to five generic MIDI control surfaces to work with the ACID interface.
For information about your specific device, please refer to the manufacturer's documentation.
Notes:
• If you have a MIDI controller that includes buttons and knobs or faders, you can use the device as an external control device and as a MIDI
input device for recording MIDI — for example, you can use the buttons, knobs, and sliders on the device for external control, and still use
the keyboard, pitch wheel, and modulation wheel for recording MIDI. For more information, see
the keyboard, pitch wheel, and modulation wheel for recording MIDI. For more information, see
MIDI messages that are mapped to external control functions are filtered when you record MIDI. If a note message is assigned to a control
surface function, both the note-on and note-off messages will be filtered.
surface function, both the note-on and note-off messages will be filtered.
• Effects parameters cannot be adjusted with a generic controller.
Important:
A generic control surface can control either trim or automation settings. In order to control automation settings, you
must assign a button to place the control surface in automation mode, and the Automation Settings button
on the track or bus
you want to edit must be set to Automation Write (Touch) or Automation Write (Latch).
Customizing your control mappings
1.
From the Options menu, choose Preferences to display the Preferences dialog.
2.
Select the External Control & Automation tab.
3.
Double-click the Generic Control entry in the Active control devices list to display the Configure Generic Control dialog.
4.
To add or change a function do the following:
a.
Choose a setting from the View function group drop-down list.
b.
Select the Learn check box.
c.
Select an command in the Host Command list and activate the control on your control surface.
d.
You can click the Edit button to fine-tune the MIDI message settings.
5.
Repeat step 4 for each command you want to make available on your control surface.
6.
To remove a function, select an item in the Host Command list and click the Reset button.
7.
To remove all functions, click the Reset All button.
8.
Click the Save As button to save your updated configuration file.
APPENDIX B
|
285