SBE HW400c/2 Benutzerhandbuch
HighWire HW400c/2 User Reference Guide Rev 1.0
Figure 13
ram
Table 22. GPIO Port Assignments for IPMI
GPIO Port
I/O
Description
. IPMI Block Diag
GPIO_00
Input
/PWRON monitor (active low)
GPIO_01
Input
HEALTHY monitor (active high)
GPIO_07
Output
Blue LED control (low = on, high = off)
GPIO_12
Input
Watchdog Timer Expired (active low)
GPIO_13
Output
Board Reset control (active low)
GPIO_14 Input
Ejector Latch monitor, L_STAT
(low = closed, high = open)
(low = closed, high = open)
GPIO_15 – GPIO_19
Inputs
Geographical Address bits 4 – 0
GPIO_20 – GPIO_23
Inputs
Boot Status bits 3 – 0
3.6.2 Temperatu
rt 1 on the Zircon PM. The 1.1V (MPC744X core
oltage), 2.5V, 3.3V, 5V and other supply voltages are connected to A/D input ports
on the Zircon PM through precision voltage-divider networks. These connections
(see Table 23 and Table 24) allow remote monitoring of the temperatures and
voltages on the HW400c/2 by a system management device (shelf manager).
(see Table 23 and Table 24) allow remote monitoring of the temperatures and
voltages on the HW400c/2 by a system management device (shelf manager).
re and Voltage Monitor
IPMI functions implemented on the HW400c/2 include board temperature sensors
TS0 and TS1 connected to I
TS0 and TS1 connected to I
2
C Po
v
October 10, 2006
Copyright 2006, SBE, Inc.
Page
40