Fujitsu PG-LND101 Benutzerhandbuch
2 Installing a 1Gbit/s Ethernet I/O Module
51
E
2.1
Installing to BX620 S2 Server Blade
`
To connect a 1Gbit/s Ethernet I/O Module to the external LAN (device), it is necessary to
install a Switch Blade or GbE Pass-Thru Blade to network blade slot 3 or 4 (NET3 or 4) of
the chassis.
install a Switch Blade or GbE Pass-Thru Blade to network blade slot 3 or 4 (NET3 or 4) of
the chassis.
2.1.1 Location of 1Gbit/s Ethernet I/O Module
Installation
Install the 1Gbit/s Ethernet I/O Module in the daughter card slot in the BX620 S2 Server Blade.
2.1.2 Installing a 1Gbit/s Ethernet I/O Module
1
Turn off the server blade.
→
→
"3.3 Turning Off the Server " in "Hardware Guide (Chassis)"
2
Touch a metal part of the chassis to discharge static electricity
from your body.
from your body.
3
Remove the server blade from the chassis.
→
→
"Chapter 4.2 Installing Server Blade" in "Hardware Guide (Chassis)"
4
Remove the top cover.
→
→
"7.2 Removing and Attaching the Top Cover" in "BX620 S2 Server Blade User's Guide"
Daughter card slot
BX620 S2 Server Blade