Fujitsu PG-LND101 Benutzerhandbuch
68
5.2
Creating a Team
Perform the following procedures to create a team.
1
Log on with the administrator privileges.
2
Click [Start] → [Settings] → [Control Panel] → [Intel®PROSet
Wired], and start Intel
Wired], and start Intel
®
PROSet.
3
Select a LAN adapter to build in the team, and right click.
4
Click [Add to Team] → [Create New Team...].
The [Teaming wizard] window appears.
5
Select a Teaming type with which you want to create a Team.
• AFT type: "Adapter fault tolerance"
• ALB type: "Adaptive load balancing"
• SFT type: "Switch fault tolerance"
• ALB type: "Adaptive load balancing"
• SFT type: "Switch fault tolerance"
Do not select other types of team.
6
Click [Next].
7
Select LAN adapter to build in the team, and click [Next].
8
Click [Finish].
9
Click [OK] and exit Intel
®
PROSet.
When the teaming setting is completed, a virtual adapter "Intel(R) Advanced Network
Services Virtual Adapter" appears.
Upper layer protocol is bound to this virtual adapter.
You cannot bind them with the Ethernet controller that makes up a Team.
The IP address is set in this virtual adapter.
Services Virtual Adapter" appears.
Upper layer protocol is bound to this virtual adapter.
You cannot bind them with the Ethernet controller that makes up a Team.
The IP address is set in this virtual adapter.
10
Restart the system.