Siig 04-0202A Benutzerhandbuch

04-0202A

The  Low Profile PCI I/O conforms to the new PCI card form factor

standard made for space constrained system designs.  Since this

installation guide is written for both, Low Profile PCI -1S and Low Profile

PCI -1P boards, some features on this installation guide might not be

present on the model you bought.  Please only refer to the features that

apply to your board.

•  Conforms to PCI v2.2 Plug and Play
•  Full support for DOS- and Windows-based software
•  IRQ sharing feature eliminates IRQ conflicts
Serial interface:
•  High-speed 16550 UART serial port (9-pin) supports baud rates

up to 920Kbps.  Works with various types of serial devices

•  Built-in 16-byte FIFO buffers dramatically increase data transmit/

receive speed

Parallel interface:
•  Conforms to IEEE 1284-1994 parallel port standard
•  High-speed parallel port supports various types of parallel port

devices

•  Supports EPP, ECP(PIO mode), Bi-directional Parallel Port (BPP)

and Standard Parallel Port (SPP) modes

•  PCB:  119.91 mm (L) x 64.41 mm (H)
•  Bracket:  18.42 mm (W) x 79.20 mm (H)

•  Pentium or equivalent computer with an available 32-bit PCI slot
•  DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000