Addonics Technologies AD2MS6GPX8 Benutzerhandbuch

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)   

Phone: 408-453-6212 

Email: www.addonics.com/support/query/

1. Make sure the computer is OFF.

2. Insert the controller into a PCIe 8X or 16X slot.

3. Insert the SAS cable(s) with the retainer side away from the board.

4. If desired, connect the ACT LEDs, anode to a 3.3V pin, cathode to the signal pin. For standard 

   LEDs, use a 120-150 Ohm load resistor in series.