Addonics Technologies RR2035ASDES Benutzerhandbuch

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)   

Phone: 408-453-6212 

Email: www.addonics.com/support/query/

1. Be sure the lock on each drive door is in an unlock position. If not, use the key 

    that comes with the Disk Array to unlock the drive door. Pull on the door lever to 

    swing open the drive door all the way. 

2. Slide a 3.5” SATA hard drive into the drive slot with the drive connector side 

    facing in. Be sure to orient the hard drive correctly as shown in the yellow label 

    on the inside of the drive door – with drive door swing open at the bottom, the 

    top of the hard drive should face to the right. The drive should slide all the way 

    into the slot with very little resistance. Forcing the drive into the slot will cause 

    drive damage or permanent damage to the Disk Array.

3. Once the drive is all the way into the drive slot, close the door all the way till the 

    drive door latch securely. This will engage power and data connection with the 

    hard drive. The LED lit for the drive slot should lit if the Disk Array already 

    powered on. You may lock the drive door with the key.

4. To remove the hard drive from the Disk Array, simply follow the step 2 – 3 in 

    reverse.

Door lock

Individual drive

bay door

Insert hard drives

with top facing right

Power & Activity LED for 

each drive bay

Main Power LED 

for each array