Jacuzzi FD85 Merkblatt

Seite von 2
Technical Specifications
DimenSionS
70-11/16" L x 35-3/8" W x 25-1/4” H
(1795 mm) L x (899 mm) W x (641 mm) H 
Drain/overflow
A: 17” (432 mm)  B: 10-1/4” (260 mm)
CuTouT
69-1/2” (1765 mm) x 34-3/8” (873 mm)
ToTal weighT
1180 lb. (535 kg) / 65.6 lb/ft
2
 (320 kg/m
2
)
operaTing gallonage
82 U.S. Gal. (310 Liters) 
Min. 70 U.S. Gal. (265 Liters) 
Max: 94 U.S. Gal. (356 Liters)
proDuCT weighT
200 lb (91 kg)
SkirT mounTing
Not Available
eleCTriCal SpeCifiCaTionS  
requires a dedicated gfCi protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz. 
heaTer (STanDarD) 
requires a dedicated gfCi protected separate circuit.
RapidHeat™: P/N BN60000
© 2007 Jacuzzi Whirlpool Bath  •  14880 Monte Vista Avenue  •  Chino, CA 91710  •  www.jacuzzi.com
inSTallaTion noTeS
Refer to installation instructions included with fixture before 
beginning installation. Please confirm product availability and 
specifications before commencing with any installation work.
 
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT 
TO CHANGE WITHOUT NOTICE.
#FR75000 10/07
fuzion
 7236 
Salon
 Spa with ChromaTherapy
fD85
Fuzion™ 7236 Salon™ Spa, Wenge 
with Chromatherapy — Right Hand
fD65
Fuzion™ 7236 Salon™ Spa, Teak 
with Chromatherapy — Right Hand
• Right Hand Drain Locations
• Overflow fitting comes with tub
• Accessories / Hardware:
 
TheraPro™ Jet Rings Kit: #D095
 
BMH 2 Jet trim Kit: # J869 
• Trim Kit Finishes Available:
 
(827) – Chrome 
 
(898) – Brushed Chrome
 
(815) – Satin Nickel 
 
(829) – Bright Brass
 
(805) – Platinum 
 
(826) – Brushed Nickel
 
(845) – Oil Rubbed Bronze
DRAIN/OVERFLOW 
(133 mm) 
5-1/4" 
SIDE VIEW 
END VIEW 
70-11/16" 
(Motor)
(Inlet Heater)
25-1/4"
35-3/8" 
(Blower)
Motor
Opt.  Service Access
17-11/16'' 
2'' 
7'' 
10-1/4'' 
12'' x 4"* 
Heater
70-11/16'' 
35-3/8'' 
12" H x 24" L
Service Access
Blower
product Shown: fuzion™ 7236  Salon™ Spa Teak  
with Chromatherapy right hand  model: fD65
* Measurements  inside unit represent cutout in floor 
to allow for drain/overflow.
Minimum Service Access dimensions given.