IBM 4400 Benutzerhandbuch
Page Orientation Select
207
Page Orientation Select
ASCII Code SSCC O
n (alpha O)
Hex Code
SSCC 4F
n
Dec Code
SSCC 79
n
Purpose
Set (change) page orientation.
Comment
The emulation can print in four different clockwise orientations:
Portrait (0°), Inverse Landscape (90°), Inverse Portrait (180°),
and Landscape (270°). The following table shows how to set (or
change) the page orientation:
Portrait (0°), Inverse Landscape (90°), Inverse Portrait (180°),
and Landscape (270°). The following table shows how to set (or
change) the page orientation:
End the syntax with a line terminator, such as a line feed or
carriage return. Different orientations cannot be present on the
same physical page. When this command is sent to the
emulation, a form feed is enacted on the current physical page.
After the form feed is issued, form length and form width revert
to the default power-up value.
carriage return. Different orientations cannot be present on the
same physical page. When this command is sent to the
emulation, a form feed is enacted on the current physical page.
After the form feed is issued, form length and form width revert
to the default power-up value.
Page orientation may also be selected from the control panel.
The following subsections describe portrait and landscape
orientation.
orientation.
Table 50. Page Orientation
n Value (hex)
Page Orientation
n = 0 or 30
Portrait (0
o
)
n = 1 or 31
Landscape (270
o
)
n = 2 or 32
Inverse Portrait (180
o
)
n = 3 or 33
Inverse Landscape (90
o
)