IBM 4400 Benutzerhandbuch
216
Chapter
7
The Super-Set Commands
Printer Protocol Select
ASCII Code SSCC P
n
Hex Code
SSCC 50
n
Dec Code
SSCC 80
n
Purpose
Selects (changes) printer protocol.
Comment
When the emulation receives this command, a software reset is
performed as if the emulation were powered-up in the
corresponding protocol.
performed as if the emulation were powered-up in the
corresponding protocol.
NOTE: The printer protocol may also be selected from the control panel.
Software Page Eject
ASCII Code SSCC J
Hex Code
SSCC 4A
Dec Code
SSCC 74
Purpose
Performs a “page eject” through software. This function is
identical to a page eject executed via the control panel (if
available on your printer).
identical to a page eject executed via the control panel (if
available on your printer).
Table 59. Printer Protocol Select
n Value (hex)
Protocol
n = 00 or 30
P-Series
n = 01 or 31
P-Series XQ*
n = 02 or 32
Serial Matrix
n = 03 or 33
Proprinter III XL
n = 04 or 34
Epson FX
*If P-Series XQ is selected, then you cannot use this command to exit the
protocol.
protocol.