HP (Hewlett-Packard) 100BASE-TX Benutzerhandbuch

10/100Base-TX Interface Card Statistics

For more detailed information about the fields described below, refer to
RFC 1213.

Field

Description

Network Management ID A unique ID assigned by the system for the

network management of each network interface.

Description

A textual string containing information about the
interface.

Type (value)

The type of interface, distinguished according to the
physical/link protocols, immediately below the network
layer in the protocol stack.

10/100Base-TX can have one of the following values:
ethernet-csmacd(6), or iso88023-csmacd(7).

The following values are for other networking products.

MTU Size

The size of the largest datagram which can be
sent/received on the interface specified in octets. This
value is 1500.

Speed in bits per second The speed of the 10/100Base-TX card, 10 Mbit/s

or 100 Mbit/s.

Station Address The interface address at the protocol layer immediately

below the network layer in the protocol stack. For
interfaces which do not have such an address, such as
serial line, this object contains an octet string of zero
length.

Administration Status The desired state of the interface. This

parameter is set to

up(1)

 and is not configurable. It

will have one of the following values:

up(1)

Ready to pass packets

down(2)

Not operative

testing(3)

In test mode