Samsung C670D Benutzerhandbuch

Seite von 168
User’s Manual
3-23
Wireless LAN
The Wireless LAN is compatible with other LAN systems based on Direct 
Sequence Spread Spectrum / Orthogonal Frequency Division Multiplexing 
radio technology that complies with the IEEE802.11 Wireless LAN 
standard.
Frequency Channel Selection of 5GHz for IEEE 802.11a or/and 
IEEE802.11n 
Frequency Channel Selection of 2.4GHz for IEEE 802.11b/g or/and 
IEEE802.11n
Roaming over multiple channels
Card power management
Wired Equivalent Privacy (WEP) data encryption based on an 128-bit 
encryption algorithm
Wi-Fi Protected Access™ (WPA™)
Setting
1. Please make sure that the Wireless Communication function is on.
2. Click Start -> Control Panel -> Network and Internet -> Network and 
Sharing Center.
3. Click Set up a new connection or network.
Turn all wireless functionalities off when near a person who may have a 
cardiac pacemaker implant or other medical electric device. Radio 
waves may affect pacemaker or medical device operation, possibly 
resulting in serious injury. Follow the instruction of your medical device 
when using any wireless functionality.
Always turn off wireless functionality if the computer is near automatic 
control equipment or appliances such as automatic doors or fire 
detectors. Radio waves can cause malfunction of such equipment, 
possibly resulting in serious injury.
It may not be possible to make a network connection to a specified 
network name using the ad hoc network function. If this occurs, the new 
network(*) will have to be configured for all computers connected to the 
same network in order to re-enable network connections. 
* Please be sure to use new network name.
The transmission speed over the wireless LAN, and the distance over 
which the wireless LAN can reach, may vary depending on surrounding 
electromagnetic environment, obstacles, access point design and 
configuration, client design and software/hardware configurations. The 
transmission rate described is the theoretical maximum speed as specified 
under the appropriate standard - the actual transmission speed will be 
lower than the theoretical maximum speed.