Patton electronic 07M2160-GS Benutzerhandbuch

Configuring the Model 2160

Model 2160 Series Getting Started Guide 

There are three different ways you can configure the Model 2160: the serial console, Telnet, or a web browser.

Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed. 

The Model 2160 provides a browser interface that allows you to configure and manage the Ethernet Extender. 
After you set up the IP address for the 2160, you can access the Ethernet Extender's Web interface applications 
directly in your browser by entering the IP address. You can then use your Web browser to manage and config-
ure the unit from a PC.

For detailed information on configuring the Model 2160 through the 
Web interface, see Chapter 4,

To configure the Model 2160 through the serial console, you can directly connect a terminal or a PC equipped 
with a terminal-emulation program (such as Hyper Terminal) to the Ethernet Extender's console port.

Use the supplied serial cable (RJ-45 to DB9F) to connect the Model 2160 to a PC. After marking the connec-
tion, configure the terminal-emulation program to use the following parameters: 

•

9600 bps 

•

8 data bits 

•

no parity 

•

1 stop bit

For detailed information on configuring the Model 2160 through the 
serial console, see Chapter 5,

Make sure that the PC you use for configuration has an Ethernet adapter and TCP/IP installed. The Model 
2160 supports Telnet for remote configuration. The command is “telnet 192.168.1.1” .  When prompted for 
the username and password for remote login, use admin for username and admin for password. All display 
screens are the same as serial console configuration. 

The default IP address is 192.168.1.1, but you may change the IP address for your application. 

For detailed information on configuring the Model 2160 through 
Telnet, see Chapter 5,