Enterasys Networks 1H582-xx Benutzerhandbuch
VLAN Configuration Command Set
Assigning VLANs According to Classification Rules
7-35
Command Alternative (v2.05.xx and higher)
clear policy class (
Example
This example shows how to clear the Ethernet II Type IP classification rule associated with
VLAN 7:
VLAN 7:
7.3.5.6
set vlan classification ingress
Use this command to add ports to a VLAN classification rule. Ports added will now be active for
this rule. Untagged frames received will be tagged according to the VLAN classification rule.
this rule. Untagged frames received will be tagged according to the VLAN classification rule.
set vlan classification ingress vlan-id port-string data_meaning data_value
[data_mask]
[data_mask]
Syntax Description
Command Defaults
Data masks are required only for classification types requiring a second
data_value. For details, refer to
data_value. For details, refer to
Matrix>clear vlan classification 7 ethernet-II-type ip
vlan-id
Specifies the number of the VLAN that will be associated
with the new classification.
with the new classification.
port-string
Specifies the port(s) to add to the new classification rule.
For a detailed description of possible port-string values,
refer to
For a detailed description of possible port-string values,
refer to
data_meaning
Specifies the data_meaning for the parameter used to
classify or filter frames. Refer to
classify or filter frames. Refer to
and
for lists of the data_meanings and associated protocol
types and classifications.
types and classifications.
data _value
Specifies the code of a predefined classifier. The range of
values is dependent on the data_meaning. Refer to
values is dependent on the data_meaning. Refer to
for the limitations.
data_mask
(Not required for most data values.) This entry is
dependent on the data_value entered. For details, refer to
dependent on the data_value entered. For details, refer to