TP-LINK TD-W8960N Benutzerhandbuch

5 

2.  If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, 

please refer to 

. If your ADSL LED is GREEN ON, please check your Internet 

configuration. You may need to check this part of information with your ISP and make sure 
everything have been input correctly. Refer to 

for more information. 

The Router's ports, where the cables are connected, and RESET button are located on the back 
panel. 

 

Figure 1-2 

¾

  ADSL: Connect to the Modem Port of Splitter or to the telephone line. 

¾

  LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your 

PC or the other Ethernet network devices. Enable EWAN function and you will be able to 
connect to Cable/FTTH/VDSL/ADSL device. 

¾

  WiFi: The switch for the WiFi function. 

¾

  RESET: There are two ways to reset the Router's factory defaults. 

1) Use the Restore Default function on Management -> settings -> Restore Default page in 

the router's Web-based Utility.