TP-LINK TD-W8970N Benutzerhandbuch

Seite von 116
TD-W8970N
  Wireless N ADSL2+ Modem Router User Guide
 
client connected to it. Keep in mind that if you change the IP address of the Router, you must 
change the range of IP addresses in the pool used for DHCP on the LAN. 
•  Start IP Address: Enter a value for the DHCP server to start with when issuing IP 
addresses. Because the default IP address for the Router is 192.168.1.1, the default Start 
IP Address is 192.168.1.2, and the Start IP Address must be 192.168.1.2 or greater, but 
smaller than 192.168.1.254. 
•  End IP Address: Enter a value for the DHCP server to end with when issuing IP 
addresses. The End IP Address must be smaller than 192.168.1.254. The default End IP 
Address is 192.168.1.254
•  Leased Time (hour): The Leased Time is the amount of time in which a network user will 
be allowed connection to the Router with their current dynamic IP address. Enter the 
amount of time, in hours, then the user will be “leased” this dynamic IP address. After the 
dynamic IP address has expired, the user will be automatically assigned a new dynamic IP 
address. The default is 24 hours. 
¾
  Static IP Lease List: The function allows you to specify a reserved IP address for a PC on the 
LAN, that PC will always obtain the assigned IP address each time when it accesses the 
DHCP server. Reserved IP addresses should be assigned to servers that require permanent 
IP settings. Click the Add Entries button, and then you will set the rule in the screen as 
below. 
 
Figure 4-22 
•  MAC Address: The MAC address of the computer on the LAN which you want to reserve 
an IP. 
•  IP Address: The IP address you want to reserved to the computer. 
¾
  Configure the second IP Address and Subnet Mask: You can configure the Router’s 
second IP Address and Subnet Mask for LAN Interface through which you can also access to 
the Web-based Utility as the default IP Address and Subnet Mask. 
) 
Note: 
UPnP, DHCP Server and the second IP Address are not available for the connection type of 
Bridging 
here, they won’t display on the
 
preceding screen since only Bridging is selected. 
4.4.4  MAC Address Clone 
33