TP-LINK TD-W8970N Benutzerhandbuch

 

Figure 4-64 

This page allows you to configure basic features of the wireless LAN interface. You can enable or 
disable the wireless LAN interface, hide the network from active scans, set the wireless network 
name (also known as SSID) and restrict the channel set based on Region requirements. 

¾

  Enable Wireless: If you want to use wireless features, you must select “Enable Wireless”. If 

you deselect “Enable Wireless” option, all the Wireless settings below will be disabled. 

¾

  Hide Access Point: When wireless clients survey the local area for wireless networks to 

associate with, you can select this option to avoided being surveyed. 

¾

  Clients Isolation: Select this option to enable AP isolation function so that stations associated 

to the AP will not be able to communicate with each other. 

¾

  SSID: Wireless network name shared among all points in a wireless network. The SSID must 

be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 
characters (use any of the characters on the keyboard). Make sure this setting is the same for 
all stations in your wireless network. Type the desired SSID in the space provided. 

¾

  BSSID: Show the MAC address of the Router. 

¾

  Country: Restrict the channel set and transmit power.   

Click Apply/Save to save your settings. 

Choose “Wireless”Æ”Security”, you will see the screen of Wireless--Security settings shown as 
below. You can configure security features of the wireless LAN interface by manually setting the 
network authentication or through QSS (Quick Security Setup) method. 

64