TP-LINK 1910010885 Benutzerhandbuch
TD-W8970B
300Mbps Wireless N Gigabit ADSL2+ Modem Router (Annex B) User Guide
29
)
Note:
After you finish the Internet configuration, please click Save to make the settings take effect.
4.5.2 3G Settings
If your modem router is in 3G Router Mode, choose menu “Network→3G Settings”, you can
configure parameters for 3G function on the screen below. To use the 3G function, you should first
insert your USB modem on the USB port of the modem router. There is already much 3G USB
modem information embedded in the modem router. If your USB modem is supported by the
modem router, then “Identify successfully” will display in the USB 3G Modem field as shown in
Figure 4-11. Select the correct Location and Mobile ISP manually, the USB modem parameters
will be set automatically.
configure parameters for 3G function on the screen below. To use the 3G function, you should first
insert your USB modem on the USB port of the modem router. There is already much 3G USB
modem information embedded in the modem router. If your USB modem is supported by the
modem router, then “Identify successfully” will display in the USB 3G Modem field as shown in
Figure 4-11. Select the correct Location and Mobile ISP manually, the USB modem parameters
will be set automatically.
Some 3G USB modem may not be supported by the modem router. For more information, please
refer to Compatibility List on our website. Log on to
refer to Compatibility List on our website. Log on to
search for the product → Compatibility List can be found under the “Download” tab on the product
page. If your 3G USB modem is incompatible with our modem router, please feel free to contact
our technical support.
page. If your 3G USB modem is incompatible with our modem router, please feel free to contact
our technical support.
Figure 4-11
¾
Location: Please select the location where you're enjoying the 3G card.
¾
Mobile ISP: Please select the ISP (Internet Service Provider) you apply to for 3G service. The
modem router will show the default Dial Number and APN of that ISP.
modem router will show the default Dial Number and APN of that ISP.
¾
Always on: Connect automatically after the modem router is disconnected. This option is
enabled by default.
enabled by default.
¾
Connect on demand: Connect on demand is dependent on the traffic. If there is no traffic (or
Idle) for a pre-specified period of time (Max Idle Time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically on.
If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time
field.
Idle) for a pre-specified period of time (Max Idle Time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically on.
If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time
field.
)
Note:
Sometimes the connection cannot be disconnected although you specify a time to Max Idle
Time because some applications visit the Internet continually in the background.
Time because some applications visit the Internet continually in the background.