Avaya 585-229-770 Benutzerhandbuch
DNM-UNIX Release 4.0 Installation and Getting Started
3 Installing and Upgrading DNM
Execute Auto-Discovery on Private Networks
December 2001
Page 66
Execute Auto-Discovery on Private Networks
The procedure in this section is optional. Users should execute the procedure only for
private networks.
private networks.
For private networks, users must manually administer the fields in the Simple Network
Management Protocol (SNMP) configuration file. Auto-Discovery uses these fields to
access the SNMP data from the Proxy Agent.
Management Protocol (SNMP) configuration file. Auto-Discovery uses these fields to
access the SNMP data from the Proxy Agent.
Required
materials
materials
Users need the completed PA001 form. Refer to the Proxy Agent section and the fields
listed below:
listed below:
• Proxy Agent IP network address
• SNMP Get Community String
• SNMP Set Community String
Procedure
Complete the procedure below to execute Auto-Discovery on private networks.
1
Access the SNMP Configuration window from the NMS user interface.
2
If selected, turn-off the button:
USE PROXY TO ACCESS TARGET
3
On the PA001 form, go to the Proxy Agent section and refer to the Network
Managers fields.
Managers fields.
In the SNMP Configuration window, enter the data from the PA001 form in the fields
below. Do not change any other fields:
below. Do not change any other fields:
• In the Target field, type [
IP address
] for the Proxy Agent
• In the Community String field, type [
private “get” name
]
• In the Set Community String field, type [
private “set” name
]