Paradyne 8777 Benutzerhandbuch

Using the Asynchronous Terminal Interface

8700-A2-GB20-00

April 2000

Use the Exit function key from any screen to terminate the session.

"

To end a session with the asynchronous terminal interface:

1. Press Ctrl-a to go to the screen function key area below the dotted line.

2. Save changes if required. A confirmation message appears if you have made

but not saved changes to your configuration.

3. Tab to  Exit  (or type e or E) and press Enter. If you have accessed the unit

through the management card, the Hotwire Chassis Card Selection menu
appears.

You can manually log out of the system or, after five minutes of inactivity, the
system will automatically log you out.

"

To manually exit from the Hotwire DSLAM system:

1. Return to the Hotwire Chassis Main Menu by selecting Exit from either the

Hotwire – MCC menu or the Hotwire – DSL menu.

The Hotwire Card Selection menu appears.

2. Press Ctrl-z.

The Hotwire Chassis Main Menu appears.

3. From the Hotwire Chassis Main Menu, select Logout.

The system exits from the current login session on the Hotwire DSLAM.