Paradyne 8777 Benutzerhandbuch

Cross-Connecting Ports

4-3

8700-A2-GB20-00

April 2000

NOTES:

Although the example in this chapter shows ports dedicated to voice or data,
a port can be configured for both voice and data.

In DS0 Cross Connect mode, for G.703 ports using Common Channel
Signaling (CCS), you must explicitly configure the cross-connections for Time
Slot 16 and related time slots.

You may find it useful to diagram your configuration. Appendix E,

Cross-Connection Worksheets

, contains a skeleton diagram for this purpose. It

also contains worksheets for documenting your time slot cross-connections
before you begin to configure them.

Setting the Cross-Connect Modes

To access the Set Cross-Connect Mode screen, follow this menu selection
sequence:

Main Menu

→

Configuration

→

Load Configuration From

→

Cross-Connect

→

Set Cross-Connect Mode

When the screen is first displayed, all ports are set to DS1 Bypass mode. In this
example, Ports 1 and 2 have been changed to

DS0 Cross-connect

, and Ports

3–8 have been changed to

DS1 Bypass

Unassigned

appears next to Ports 1

and 2 because time slots associated with the cross-connection have not yet been
assigned.

ÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓÓ

main/config/xconnect_mode

Slot: 18

Model: 87xx

CROSS-CONNECT MODE

DSX-1 Port

MODE

DSL Port

DS0 Cross-connect

Unassigned

DS0 Cross-connect Unassigned

DS1 Bypass

Assign_DS0s

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Ctrl-a to access these functions, ESC for previous menu

MainMenu

Exit

Save

Clear_All