Paradyne 8777 Benutzerhandbuch
vii
8700-A2-GB20-00
April 2000
About This Guide
Document Purpose and Intended Audience
This guide contains information needed to set up, configure, and operate Hotwire
Models 8747, 8777, and 8779 Multirate Symmetric Digital Subscriber Line
(M/SDSL) and High-bit-rate DSL second generation (HDSL2) Termination Units,
and is intended for installers and operators.
Models 8747, 8777, and 8779 Multirate Symmetric Digital Subscriber Line
(M/SDSL) and High-bit-rate DSL second generation (HDSL2) Termination Units,
and is intended for installers and operators.
Document Summary
Section
Description
About the Hotwire 8747, 8777, and 8779 Termination Units.
Describes the Hotwire Termination Units’ features and
capabilities.
Describes the Hotwire Termination Units’ features and
capabilities.
Using the Asynchronous Terminal Interface. Provides
instructions for accessing the user interface and navigating
the screens.
instructions for accessing the user interface and navigating
the screens.
Initial Startup and Configuration. Provides instructions for
configuring the unit.
configuring the unit.
Cross-Connecting Ports. Provides instructions for
cross-connecting the time slots of the DSL and DTE ports.
cross-connecting the time slots of the DSL and DTE ports.
Security. Presents procedures for creating a login, setting
the effective access levels, and controlling SNMP access.
the effective access levels, and controlling SNMP access.
Monitoring and Troubleshooting. Describes using the LEDs,
status messages, and network statistics to monitor the unit
and diagnose problems.
status messages, and network statistics to monitor the unit
and diagnose problems.