Samsung BP59-00140E-01 Benutzerhandbuch
3-4
Using
3-4
LED Indications
LED Indications
:Light is On :Light is Blinking :Light is Off
STATUS
LAMP
STAND BY
STATUS
If you press the [POWER] button on the remote control or projector, the screen
appears within 30 seconds.
The projector is operating normally.
The projector is preparing an operation after the [POWER] button on the projec-
tor or the remote control has been pressed.
tor or the remote control has been pressed.
The [POWER] button has been pressed to turn off the projector, and the cool-
ing system is in operation to cool off the inside of the projector. (Operates for
about 3 seconds.)
ing system is in operation to cool off the inside of the projector. (Operates for
about 3 seconds.)
The cooling fan inside the projector is not operating normally. Refer to Action 1
in Clearing Indicator Problems below.
in Clearing Indicator Problems below.
The lamp cover protecting the lamp unit is not closed properly. Refer to Action 2
in Clearing Indicator Problems below.
in Clearing Indicator Problems below.
The projector has changed to Cooling mode because its internal temperature
has increased beyond the maintenance limit.
has increased beyond the maintenance limit.
Refer to Action 3 in Clearing Indicator Problems below.
The projector has turned itself off automatically because its internal tempera-
ture has increased beyond the maintenance limit. Refer to Action 4 in Clearing
Indicator Problems below.
ture has increased beyond the maintenance limit. Refer to Action 4 in Clearing
Indicator Problems below.
A problem has occurred with the operation of the lamp. Refer to Action 5 below.