Epson T5270 Benutzerhandbuch

Epson SureColor T-Series User’s Guide

When the printer printed without using the printer driver included with the printer or the PS driver included with 
the optional Adobe PostScript 3 Expansion Unit, the job names and estimated times in the following table may not 
be displayed correctly. 

*1. T7270D/T5270D only
*2. T7270/T5270/T3270 only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only

Print Queue

*3

XXXXXXXXXXX (name of 
waiting print job)

Waiting Job Name

User

Estimated Start 
Time

Estimated Print 
Time

Printing 
Availability

Lists the estimated start time and time needed to 
print the selected job. 

It also predicts whether the job can be completed 
without replacing paper, ink or the Ink 
Maintenance Tank. The estimates are guidelines 
only. We recommend proceeding even if Can Not 
Complete is displayed. 

Remote Manager and the LFP HDD Utility display 
the reason for the Can Not Complete message 
and allow you to hold or cancel the job. 

U

Printing availability by paper remaining cannot 
be performed correctly if Roll Paper Remaining 
is Off. 

The printer will not predict availability on the 
basis of the amount of ink remaining when 
documents are printed using LFP Print Plug-In for 
Office or EPSON CopyFactory5. 

When the printer printed using the PS driver 
included with the optional Adobe PostScript 3 
Expansion Unit, Estimated Start Time and 
Estimated Print Time are displayed as "0 
minutes". 

Held Queue

*2, *3

View Hold 
Queue

XXXXXXXX
XXX (name 
of held job)

Paused Job Name

User

Paper Type

Source

Size

Reason For Hold

This option is available only if On is selected for 
Store Held Job in the Setup menu, 

Displays the print settings for held jobs and the 
reason the job is held. 

Jobs that are held because the job print settings 
differ from those currently selected for the printer 
can be printed as described below. 

(1) Replace the paper and take whatever other 
steps may be necessary to ready the device for 
printing. 

(2) Select Resume All Jobs.

Resume All Jobs

Press the Z button to resume all held jobs currently in the queue.