Epson T5270 Benutzerhandbuch
Epson SureColor T-Series User’s Guide
Maintenance
163
3
Place the used Ink Maintenance Tank in the
clear bag included with your new Ink
Maintenance Tank, and make sure that the
zipper is closed tight.
clear bag included with your new Ink
Maintenance Tank, and make sure that the
zipper is closed tight.
4
Install the new Ink Maintenance Tank.
5
Close the ink maintenance tank cover.
Replacing the Cutter
Replace the cutter when it is not cutting paper cleanly.
Supported cutter
Use a cross-head screwdriver to replace the cutter.
Make sure you have a cross-head screwdriver with you
before replacing the cutter.
Make sure you have a cross-head screwdriver with you
before replacing the cutter.
Buttons that are used in the following settings
1
Remove any paper from the printer.
U
U
U
2
Confirm that the printer is ready to print. Press
the l/r buttons to highlight - and press the
Z
the l/r buttons to highlight - and press the
Z
button.
The Maintenance menu will be displayed.
3
Press the d/u buttons to select Cutter
Maintenance
Maintenance
, and then press the Z button.
4
Press the d/u buttons to highlight Replace
Cutter
Cutter
and press the Z button.
5
The cutter will move to the replacement
position.
position.
6
Remove the old cutter from the printer.
Loosen the screw holding the cutter in place
using a cross-head screwdriver and pull the
cutter straight out.
using a cross-head screwdriver and pull the
cutter straight out.
c
Important:
Do not touch the IC chip on the Ink
Maintenance Tank.
Do not touch the IC chip on the Ink
Maintenance Tank.
Doing so may prevent normal operation and
printing.
printing.
c
Important:
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.