Epson T5270 Benutzerhandbuch

Epson SureColor T-Series User’s Guide

If roll paper is being inserted, paper is loaded 
automatically, and a beep tone sounds.

7

Lower the roll lock lever. 

8

Set the Roll 2 unit, and then press Z button. 

9

Check the media type. 

If a barcode giving information on the paper is 
printed on the roll
When the paper is loaded, the barcode is read 
automatically, and the Media Type and Roll 
Paper Remaining settings are configured 
automatically. 

After Ready is displayed, you can print. 

If a barcode giving information on the paper is 
not printed on the roll
The display shows the Media Type currently 
selected with the printer. 

To print with the displayed settings, use the d/u 
buttons to select Keep Settings Above, and 
press the Z button. 

To change the settings, select Change Settings, 
and press the Z button. U

The printer is equipped with a built-in cutter. You can 
cut roll paper after printing by using one of the 
following methods. 

O

Auto Cut: 

The cutter cuts automatically at a determined 
position each time a page is printed in accordance 
with the setting of the printer driver or control 
panel menu. 

O

Manual cut:

The cutting position is specified on the control 
panel, and then the roll paper is cut. A cutline is 
printed for manual cutting and can be used as a 
guide when cutting paper using the built-in cutter.