Epson T5270 Benutzerhandbuch

Epson SureColor T-Series User’s Guide

displays the results, preventing waste caused the 
paper running out part way through a print job. 
This allows you to choose whether to print on the 
existing roll or replace the paper, preventing waste. 

The T7270/T5270/T3270 can predict availability 
only when the optional hard disk unit or Adobe 
PostScript 3 Expansion Unit has been installed.

If paper has run out, the T7270D/T5270D can 
switch to Roll 1 or Roll 2 automatically based on 
predicted availability and continue printing. 

This section describes how to replace paper. The 
process for removing the current paper differs with the 
type of paper loaded; follow the instructions displayed 
in the control panel. 

Buttons that are used in the following settings

1

Confirm that the printer is ready and press the 
(

 button. 

The Load/Remove Paper menu will be 
displayed. 

2

Press the d/u buttons to select the type of paper 
used to replace the current paper, and then press 
the Z button. 

3

The printer will eject the current paper. 

The process for ejecting the paper varies with 
the type of paper loaded, as described below. 

If On is selected for Roll Paper Remaining
Barcode printing will begin; when printing is 
complete, the roll will rewind automatically. 

If Off is selected for Roll Paper Remaining
The roll rewinds automatically.