Epson T5270 Benutzerhandbuch

Seite von 213
Epson SureColor T-Series User’s Guide
Basic Operations
52
Using the Control Panel
This section describes how to use the control panel for 
the auto take-up reel unit. 
Attaching the Paper
This section describes how to attach roll paper to the 
auto take-up reel unit roll core. 
The procedure varies with the take-up direction. 
Taking Up the Paper Printable Side 
Out
For information on installing the roll core, see the 
Setup Guide for the optional auto take-up reel unit. 
c
Important:
Confirm that the end of the roll is cut straight 
across. The unit will not function as expected if 
the end of the roll is wavy or curved. 
Note:
For information on installing the auto take-up reel unit, 
see the documentation supplied with the auto take-up 
reel unit attachment. 
Power lamp
Displays the status of the auto take-up reel unit. 
On
: The auto take-up reel unit is 
ready for use. 
Flickering
: The auto take-up reel unit is in 
use. 
Blinking
: The auto take-up reel unit is in 
power-saving mode. 
Intermittent 
blinking
: An error has occurred. 
Off
: The power is off. 
Auto switch
Selects the auto take-up direction.
Backwar
d
: The roll is taken up with the printable 
side in. 
Forward
: The roll is taken up with the printable 
side out. 
Off
: The auto take-up reel unit does not take 
up paper. 
Manual switch
Selects the manual take-up direction.
The setting selected with the Manual switch takes 
effect when the Auto switch is in the Off position.
Backwar
d
: The roll is taken up with the printable 
side in. 
The speed will increase after the button 
is pressed for more than three seconds. 
Forward
: The roll is taken up with the printable 
side out. 
The speed will increase after the button 
is pressed for more than three seconds. 
c
Important:
Before proceeding, select Off for Auto Cut. Using 
the auto take-up reel unit when On is selected will 
cause errors. 
U
Auto switch