Epson T5270 Benutzerhandbuch

Epson SureColor T-Series User’s Guide

2

With the side of the document to be read facing 
up, align the right edge of the document with the 
loading guide. 

3

Insert the document horizontally so that the 
entire edge touches all inner rollers.

If the edge touches the roller, the document is 
fed to the read start position automatically. 
After automatic loading starts, release your 
hand and do not obstruct the loading of the 
document.

4

After the document has been loaded, remove the 
loading guide, and then make sure the left edge 
of the document and the guide line are aligned.

If the document is copied or scanned with the 
loading guide still attached, the edge of the 
document may be damaged. 

This section describes the procedure to copy on the 
control panel of the printer. 

Copies are printed along the following loading paths 
depending on the model you are using. 

O

T7270/T5270/T3270

Loaded roll paper or cut sheet

c

Important:
If the document slants greatly from the 
guide line, the slanted and protruding 
section is not copied or scanned. Press the 
r