Epson T5270 Benutzerhandbuch
Epson SureColor T-Series User’s Guide
More Ways to Print
90
4
Set Print Quality and other necessary settings,
and then print.
and then print.
The printer prints to the roll paper of Roll 2 (A0
Width).
Width).
If A3 or A2 is selected in Step 3, the printer
prints to the roll paper of Roll 1 (A2 Width).
prints to the roll paper of Roll 1 (A2 Width).
Making Settings for Mac OS X
1
Using the control panel of the printer, confirm
Best Fit
Best Fit
is set in Setup menu > Printer Setup >
Roll Paper Setup
> Roll Switch Condition >
Paper Width
.
The default Paper Width setting is Best Fit. If
the setting has not been changed, the setting is
Best Fit
the setting has not been changed, the setting is
Best Fit
.
2
On the computer, open the Print screen,
confirm that Paper size is Roll Paper.
confirm that Paper size is Roll Paper.
In this example, select A1.
3
Check that the Roll Switch is Auto.
If the setting is not Auto, click it and select
Auto
Auto
.
4
Set Print Quality and other necessary settings,
and then print.
and then print.
The printer prints to the roll paper of Roll 2 (A0
Width)
Width)
If A3 or A2 is selected in Step 2, the printer
prints to the roll paper of Roll 1 (A2 Width).
prints to the roll paper of Roll 1 (A2 Width).
Switching to Roll 1/Roll 2 by Roll
Length
Length
If you use the settings described below, the printer
switches between Roll 1 and Roll 2 automatically to
print using the roll with the most paper remaining.
switches between Roll 1 and Roll 2 automatically to
print using the roll with the most paper remaining.
Usage example
You want to predict whether the roll paper remaining
is less than the print job during continuous unattended
operation of a large print job, switch to the other roll
paper automatically, and continue printing without
stopping.
is less than the print job during continuous unattended
operation of a large print job, switch to the other roll
paper automatically, and continue printing without
stopping.
In this example, the paper is loaded as follows.
Roll 1: Plain Paper A1 Width
Roll 2: Plain Paper A1 Width
Settings on Windows
1
Use the control panel of the printer to open the
Paper menu and set Roll Paper Remaining to
On
Paper menu and set Roll Paper Remaining to
On
, and then set the Roll Paper length loaded
into both Roll 1 and Roll 2.
When you set the roll paper, if roll paper length
has been set or a barcode with roll data is
printed on the current roll, proceed to Step 2.
has been set or a barcode with roll data is
printed on the current roll, proceed to Step 2.
U
2
Using the control panel of the printer, confirm
Print Length
Print Length
is set in Setup menu > Printer
Setup
> Roll Paper Setup > Roll Switch
Condition
> Paper Length.
The default Paper Length setting is Print
Length
Length
. If the setting has not been changed, the
setting is Print Length.
U
3
Open the Printer Settings tab of the printer
driver and confirm that Source is Roll Auto -
XXXXX
driver and confirm that Source is Roll Auto -
XXXXX
.