Epson 800N Benutzerhandbuch

7. Set the following options in the AppleTalk Configuration 

dialog box:

◗

Available Zone

Select the network zone where you want the printer to 
appear.

◗

Printer name

You can use your printer’s default name or change it. If 
you have more than one printer of the same type on 
your network, be sure to give them unique names. 

◗

Entity Type

EPSON Net! shows the printer’s Entity type on an 
AppleTalk network. You don’t have to set these 
options. 

8. Click

 OK

 to send the new settings to the printer and return 

to the Summary dialog box. Click 

Update

 to send the new 

settings without closing the Configuration dialog box. 

9. Click 

Exit

.

You now need to install your printer driver and select your 
printer in the Chooser. See page 28 for instructions. 

Before you start, turn off all other active applications (such as 
virus protection). 

If you’re using Windows NT, you need to log on as 
Administrator.

1. Insert the setup disk 1 of EPSON Status Monitor 2 in your 

diskette drive.

2. In Windows 95 or Windows NT 4.x, click 

Start

 and 

Run

. 

Caution:
Once you make changes 
to the Ethernet card, 
wait for at least five 
minutes before turning 
off or restarting your 
printer. 

QuikSet2.fm  Page 24  Wednesday, October 15, 1997  3:49 PM