Epson 800N Benutzerhandbuch
4
Setup Guide
4. Before you plug in the printer, make sure the power is off.
Check the Ppower button; it’s off when its surface is raised
above the printer surface.
above the printer surface.
5. Plug the power cord into a properly grounded outlet.
Installing the Ink Cartridges
1. Lower the output tray and raise the printer cover.
2. Press the P power button to turn on the printer. The P
power light flashes, the B and I ink out lights come on,
and the ink cartridge holders move to the left.
and the ink cartridge holders move to the left.
Caution:
Do not plug the printer
into an outlet controlled
by a wall switch or
timer, or on the same
circuit as a large
appliance. This may
disrupt the power,
which can erase
memory and damage
the power supply.
Do not plug the printer
into an outlet controlled
by a wall switch or
timer, or on the same
circuit as a large
appliance. This may
disrupt the power,
which can erase
memory and damage
the power supply.
power
QuikSet2.fm Page 4 Wednesday, October 15, 1997 3:49 PM