Epson C41 Benutzerhandbuch
2
4. Tube Adjustment and Positioning
a.
Use adhesive pads to attach tube guide securely on the top right of the printer (Fig 4-1).
b.
Make sure the tubes are not twisted and are straight. (Fig. 4-2).
Fig. 4-1
Fig. 4-2
c.
Adjust tubing between cartridge compartment and tube guide to correct length; allowing enough room for the cartridges to move back
and forth freely.
and forth freely.
d.
Plug printer back in and make sure system moves securely and smoothly.
5. Refilling Ink
When the ink levels reach the indicator margin (sticker on the ink tank with red line in (Fig. 5-1), the ink tank system has reached its quotient
line and needs to be refilled.
When the ink levels reach the indicator margin (sticker on the ink tank with red line in (Fig. 5-1), the ink tank system has reached its quotient
line and needs to be refilled.
Fig. 5-1 Fig. 5-2
Follow these steps:
Follow these steps:
1.
Gently remove the air breather plugs in order to have more filling room.
2.
Remove plugs off of filling hole and refill the proper color of ink into the corresponding ink tank (use towel to wipe off any
spillage).
spillage).
3.
Make sure you use the specially designed ink for the CI System as they are designed for optimal results.
NOTE: When removing CIS, remove cartridges and put tape or napkin over dispensing hole.
Printer and ink tank MUST remain at the same level (not higher and not lower).