Printek Mt3-II Benutzerhandbuch

4 

•  The recommended room temperature for charging is between 68°F (20°C) to 77°F (25°C). 
•  The battery storage temperature is 40°-104°F (4°-40°C).  Do not store a fully charged battery at 

temperatures greater than 104°F (40°C) for long periods of time – the battery may permanently lose 
charge capacity. 

•  Be sure to use a fully charged battery before long or battery intensive printing sessions.  Certain 

operations (for example, printing receipts with a lot of bar codes and graphics) drain the battery more 
quickly than others. 

 

 Caution: Do not disassemble, short circuit, heat above 80°C, or incinerate.  The battery may explode. 

 

Battery Disposal 

Only dispose of used batteries according to your local regulations.  If you do not know your local 
regulations, the Rechargeable Battery Recycling Corporation (RBRC) is a non-profit organization 
created to promote recycling of rechargeable batteries.  For more information visit www.rbrc.org. 

 

 

 

 

One battery cartridge is included with the printer.  Similar to a cordless phone battery, the printer’s battery must 
be charged before using it. 

Refer to the following picture to install the battery pack in the printer. 

1.  Unlock the battery door by sliding the battery door release toward the center of the door, and open the 

battery door.